GypWall QUIET IWL
GypWall QUIET IWL is a non-load bearing twin frame separating wall mostly used to provide acoustic insulation when dividing flats and apartments, but also applicable to commercial and industrial settings if a specific level of soundproofing is required. The system can be installed without bracing and does not require pre-completion testing, it is in accordance with the BS 5234 requirements and acoustic values prescribed by the Building Regulations Approved Document E.
Certain consideration should be taken into account upon installation, including:
- heavy fixtures and service positions should be planned at the frame erection stage and all penetrations need to be fire stopped;
- in case the room layout includes structural steelwork, there might be a slight loss of acoustic performance through the steelwork;
- rock wool should be placed within the cavity in order of providing adequate flame and some closure;
- when accommodating services, every penetration should be carefully planned and positioned in order of avoiding such penetrations to affect the system’s fire resistance and acoustic performance; electrical services should be installed in accordance with BS 7671 while in order of avoiding abrasion of the cables running through the metal frame, they should be protected with the conduit or other adequate mean of protection;
- if dealing with an uneven floor, a 38mm timber sole plate should be installed, while when installing a new screeded or concrete floor, installing a damp-proof membrane should be taken into account;
- deflection heads may be required for the supporting floors and underside of the roof structures;
- lightweight fixtures can be installed directly to the partitions while medium ones may require additional fixing channels.
CHOOSE MANUFACTURERS
Brand: British Gypsum
Model and Size: 48 S 50 'C' Stud - 2.4 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 48 S 50 2.4 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different..
£5.55
£6.66 inc VAT
Brand: British Gypsum
Model and Size: 50 DC 60 - 3.6 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 50 DC 60 Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and deflection he..
£167.38
£200.86 inc VAT
Brand: British Gypsum
Model and Size: 50 EDC 70 - 3.6 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe 50 EDC 70 Extra Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and d..
£272.90
£327.48 inc VAT
Brand: British Gypsum
Model and Size: 50 FEC 50 - 3.6 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 50 FEC 50 Folded Edge Standard Floor & Ceiling Channel is the most commonly used product for securing wall studs in ceiling and floor junctions for partition heights of up to 4200mm. They are made using the UltraSteel process providing a more stabile a..
£86.07
£103.28 inc VAT
Brand: British Gypsum
Model and Size: Support Plate - 130mm
Delivery Time: 2 - 4 days
British Gypsum Gypframe Service Support Plate is especially used for plywood installation within the partition cavity and in a variety of other applications.The channel can be used in variety of different systems, including:FireWall provides up to 240 minutes of fire resistance, while requ..
£119.45
£143.34 inc VAT
Brand: British Gypsum
Model and Size: 48 I 50 'I' Stud - 2.7 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe 48 I 50 2.7 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same p..
£146.75
£176.10 inc VAT
Brand: British Gypsum
Model and Size: 99 FC 50 - 2.4 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 99 FC 50 Fixing Channel has a very wide application, but especially compatible for cross-bracing in medium weight fittings in twin frame wall systems, in accordance to BS 5234.The channel can be used in variety of different systems, including:FireWall provides up to..
£122.89
£147.47 inc VAT
Showing 1 to 7 of 7 (1 Pages)