Ceresit CT84 Express - Foam Adhesive for Internal and External Wall Insulation Boards

Ceresit CT84 Express is a one-component low expansion polyurethane adhesive for fixing an External Wall Insulation boards (Phenolic, PIR, Expanded Polystyrene) and also plasterboards in drylining. Approximately 2 hours after application, the insulation boards may be smoothed, anchored and, then the reinforced with fibreglass mesh base coat layer may be applied using Ceresit ZU or CT 87. Ceresit CT 84 is also used for fixing such materials as EPS and XPS boards and hard mineral wool to all different surfaces such as wood, OSB boards, bitumens, ceramic bricks, concrete, coated and galvanised sheet plate, dry cellular concrete.

• Coverage: 10m2 - 100% more than traditional cement adhesives
• 15% higher adhesive strength than traditional cement adhesives
• Low pressure
• Application from 0C and at high humidity
• Perfect for "warming to warming" system
• Enhanced thermal insulation properties
• High homogeneity of adhesive thanks to metal ball protecting against too large air bubbles

• External walls insulation systems
• Drylining

• The Technical Approval in the system
• Certificate ITB-0173/Z
• The Technical Approval of the Building Research Instituteno AT-15-8372/2010 and the National Declaration ofConformity No CT 84/1/10 of 25.05.2010

Ceresit EPS and Mineral Wool External Wall Insulation Systems are BBA approved systems